All Activity

The image quality is terrible I know but unless its damage to me the 8 looks different. The left image shows a straight sided 8 where the top and bottom loop appear mostly equal with parallel sides. (This appears be to consistantly the case for the year and die pairing) The other image on the right shows the coin in question with more slanted shape and sides. It's most likely nothing. But its a good example of a question where my own research wont provide a definitive awnser.

Ok thanks yes I understand now, the last 1 totally out of place. I was looking for doublng or a number over a number. Here is an example of a question I cant awnser myself and I have checked all I can find with the same die pairing to see if I can see one the same. By looking at the attached image you can see the bottom loop of the 8 "appears" smaller than the top loop.

The first three digits were already on the die, the last of the four entered manually afterwards. The spacing and positioning will sometimes appear odd, and this is not unusual. Granted though, this one is at the top end of 'odd'.

Please could you explain what's occuring on this coin, many thanks.

I accept the apology thanks. Maybe I was quick to get carried away. I know doubled or repunched characters are not of much interest I have learnt that. But some insignificant types or differences on coins have have been assigned freeman or gouby numbers and classed as more than insignificant although widely considered not real varieties. I dont have the all the book's and as far as I can see If one of the main specialist has written about a specific difference on a coin then it becomes something of interest. FYI i did exhaust searching for any written information about the coin in question. I'm quite happy doing my own research but if I can't find the a definitive awnser then I may ask the question. I started the question with I doubt it. I was just looking for confirmation of my own deduction thats all.

If that was my question I would have given that answer a haha, but I guess not everyone shares my sense of humour.

Cool. I always thought that it would be cool to be out and about town with a full one of these But also a full one of these My understanding is that each spring load holds 5 of each denomination so 5 3d, 5 6d, 5 1/-, 5 2/-, 5 2/6, 5 half sovereigns & 5 sovereigns would give quite the jolly time on the town in an era (say 1900) where a pint of stout was 3d Oh, no, I don't own these but if it were back in the day, I would!

If the diameter is correct, there is little alternative in the way of explanation. I think I have just found another box worthy of ticking. Boxes are getting harder to tick as time moves on.

Calm down everyone, nobody is accusing anyone of dishonesty or lying, or any any other form of undesirable attribute. It is a friendly forum, though I do seem to offend occasionally - not intentionally, but we are who we are and I might be a bit set in my ways to change. As Coinery wrote, it was intended as tongue in cheek, as a perusal of my similar previous posts with a similar emoticon would lead you to infer. All questions are valid, but with multiple questions on the doubling of characters already asked on this forum and replied to ad nauseum, I assumed that with over 160 posts, some of a similar nature, you had already explored that search option and done some background reading. A quick search of "doubled OR repunched characters" brings up over 600 posts, so lots of wheels have been reinvented over time. Apologies for any offence caused - it wasn't intentional. I am genuinely harmless, but rushed off my feet of late due to a fortnight in hospital with sepsis causing HMRC filing grief. And on another apologetic note. I give notice of apologies to Coinery for acquiring the Anchor over Key marked Elizabeth I halfpenny in the recent Noonans sale with the penny anchor punch. I think it might be big enough to fit a 2d, but haven't had time to explore yet. It also has lots of underlying detail from the previous state of the portcullis punch employed, so could be more useful than normal. I will send pics when I have time and probably drop in during the next few weeks if you are around as I have just had a change of tenant in Yeovil, so have to do some repairs. I assume it was on your list of things to acquire.

when closed, plain cases.....

another cupboard sort out found these coin holders hiding, looking at my tags I bought theses in 2023, put away and forgotten about..........., I bought these from a local fair and was included with 3 silver vesta cases, thought id show these as they are coin related, Ive always thought that they were sovereign holders both hallmarked for 1911, 👍

It was probably a badly formed planchet .

This similar low grade example sold on ebay a few days ago for over £70

"Missing Waves" was intended as a joke (and should've been in the singular). What kind of force could have caused such a surgical removal of part of the face of a coin, without any sign of damage extending beyond the affected area or through to the other side?

Since I have been accused/suspected of being dishonest and or a liar here my back is up. I'm just passionate about my new interest. Sorry if that's intolerable.

Whatever. Rob be onside or dont couldnt give a monkey's.

Your call, m’friend! Though I could argue that, in the context of this post alone, Rob’s comment appeared very much tongue-in-cheek to me? That’s how I interpreted the bandit emoticon at least?

I started the question with I doubt it.. So no seeing these for the first time I wasnt classing it as a rarity rather simply asking the question for confirmation out of interest if nothing else.

Rather than missing waves, I'd say that it's the exergual line that's (partially) missing, probably damaged post-mintage.

Alas, not a variety; I think I can rationalise it as a planchet defect, but I'd be delighted to hear what others think. I hope the images are clear enough. I see a fairly well-defined circular or elliptical area where the die has not properly impacted the surface of the coin. Until I took the pictures I hadn't noticed that the right edge of the date zero falls within the area in question and the character has suffered some distortion. Maybe this complicates the thinking a bit? I can see no corresponding distortion on the obverse, making me think that the planchet may have had a weak patch which fell away during the minting process. I have no interest in value. I imagine most people looking for a 1950 penny would want a normal one in better condition! But if someone's trying to put together a penny date run of coins with minting errors, the scarce dates would be tough to find.

In respect to this post tolerant of what? It's a valid question I asked is it not? It's not about making sides/ brown nosing. Im going to say it how it is. This is a public forum, keep it amicable or 🤐

With all due respect to Rob, I too have noticed that he’s coming over as being a little less tolerant than usual…I think this could be, in part, on account of the gulf between his knowledge and the cerebral challenges he getting on this forum nowadays, if ever, to be fair! Top tip, though…as infirm, elderly, decrepit, grey, miserable and grumpy as he may be…he’ll be worth much more to your numismatic journey onside 😉

I guess seeing some of these for the first time its a rarity, working through my hoard and seeing double stamped and clashes for the first time I get this feeling "Wow Ive found a rarity!" ........moving on I've calmed with education.... Still is is great to see these and find them... 👍

there are a few where a small ish premium can be gained the 1850 farthing 5 over much lower 5 comes to mind