ozjohn Posted June 22, 2017 Posted June 22, 2017 I know everyone has their own ideas on this topic and I have been trying to obtain acceptable photos for some time. Finally I have found something that seems to work. The coin below was photographed by a Lumix DMC-TZ20 camera without any illumination save the light in the room being a small table lamp which was shadowed where the coin was situated by my printer. The Lumix was mounted on an Aldi Maginon tripod and set on IA focused on the coin to fill as much of the field as possible. The photo was taken using the 10 s. delay to avoid movement. The f stop was 6.4 and shutter speed 1/15 s.. I have tried before with extra illumination and using the macro setting which proved unsatisfactory with bright highlights on parts of the coin and poor depth of field 2 Quote
1949threepence Posted June 22, 2017 Posted June 22, 2017 Nice one. I just use the camera on my tablet. Not as good as yours, but does a reasonable job. Quote
Paulus Posted June 22, 2017 Posted June 22, 2017 I am no expert but have spent many hours trying to get results that I am happy with. For me, capturing the toning and eye appeal as it is in hand, is the primary objective. Here is an example of a 1918 HC I am happy with, photos-wise, a different coin to yours of course. It has the same 'life' and 'depth' as when I view it in the raw: 1 Quote
ozjohn Posted June 23, 2017 Author Posted June 23, 2017 Hi Paulus, As I have said I am learning to photograph coins. Here is an example of a shiny coin. It was taken under the same conditions as before but lacks the lustre and consistency you have managed to achieve. Any tips would be appreciated. Quote
Nick Posted June 23, 2017 Posted June 23, 2017 The only question should be: "Is my photo an accurate representation of the coin?". If so, mission accomplished. If not, keep experimenting... Here is my 1918 halfcrown: Quote
Nonmortuus Posted June 23, 2017 Posted June 23, 2017 (edited) I have been messing around with lighting lately, this 1918 I picked up a few weeks ago and it lit by a single daylight bulb lamp from the top of the coin trying to get the light source as far over the coin without blocking the lens. Edited June 23, 2017 by Nonmortuus Quote
Nick Posted June 23, 2017 Posted June 23, 2017 3 hours ago, Nonmortuus said: I have been messing around with lighting lately, this 1918 I picked up a few weeks ago and it lit by a single daylight bulb lamp from the top of the coin trying to get the light source as far over the coin without blocking the lens. I use the same method. Daylight bulb, DSLR with macro lens, subject about 15-20cm from end of lens. Quote
Leo Posted July 1, 2017 Posted July 1, 2017 Despite recommendations to the contrary, you may want to give axial lighting a go. I've built a small box and been playing around. So far I've found that a combination of one light source doing the axial thing + another one on top you can get quite nice results, specially with bronze/ copper. I attach a couple of examples: 1 Quote
Leo Posted July 1, 2017 Posted July 1, 2017 This is the homemade box that I use. The camera is a Sony e-lens with a long tele and some extension rings to be able to focus close. The lights are IKEA. The copystand is a recent addition from eBay and I am delighted with it... 1 Quote
PWA 1967 Posted July 1, 2017 Posted July 1, 2017 Hat off Leo ...pictures speak more than a thousand words The third pictures look spot on and a nice Copper penny. Quote
Leo Posted July 1, 2017 Posted July 1, 2017 Thank you! I am pleased with the results but it has taken me more than a year to get to it. I love that penny. One of my favourite coins and I'm delighted that finally I've managed to get a photograph closer to what it looks like. Quote
PWA 1967 Posted July 1, 2017 Posted July 1, 2017 11 minutes ago, Leo said: Thank you! I am pleased with the results but it has taken me more than a year to get to it. I love that penny. One of my favourite coins and I'm delighted that finally I've managed to get a photograph closer to what it looks like. Have you got one of the reverse or will it take a while ?. Quote
Nick Posted July 2, 2017 Posted July 2, 2017 Have you tried blocking the light perpendicular to the camera? Otherwise, some light will reflect off the glass into the camera and reduce the contrast. You may then be able to dispense with the direct lighting. Quote
Leo Posted July 2, 2017 Posted July 2, 2017 5 hours ago, Nick said: Have you tried blocking the light perpendicular to the camera? Otherwise, some light will reflect off the glass into the camera and reduce the contrast. You may then be able to dispense with the direct lighting. I suppose putting a screen to block hitting the lens? I have this morning. It makes sense, but I can't really tell yet... 17 hours ago, PWA 1967 said: Have you got one of the reverse or will it take a while ?. Of course! Now I need to photograph again ALL of my coins 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.