scott Posted June 22, 2010 Posted June 22, 2010 i thought that, but the wear means it would be that colour right from the off, also dont see why penny area hasn't been treated Quote
Peckris Posted June 22, 2010 Posted June 22, 2010 i thought that, but the wear means it would be that colour right from the off, also dont see why penny area hasn't been treatedYes, good point. It looks a little strange, the lustre, but environmental toning could account for that. Quote
scott Posted June 23, 2010 Posted June 23, 2010 thats the thing, its not lustre, its just the metal colourthoughts on this one?and here is a 1919 farthing Quote
Red Riley Posted June 23, 2010 Posted June 23, 2010 I can't see them all that clearly, but the bun farthing is probably the result of a chemical or even something as mundane as some foodstuff being spilt on it. The 1919 farthing is very typical of it era and if I recall this feature continued until 1921. If brass cartridge cases were used and they contained simply copper and zinc, they could have been added to the furnace without any problems, but why this should make the metal streaky, I know not.Incidentally, this is a picture of the 1875 1d with streaky toning which I have suggested may be a result of mixing copper ores from two different sources. Quote
scott Posted June 24, 2010 Posted June 24, 2010 and anyway, we wern't the only ones with streaky coins Quote
1949threepence Posted June 24, 2010 Posted June 24, 2010 Question ~ this "streaking" on coins, as discussed and shown above. Is that the same thing as what they call "marbling" ? Quote
Peckris Posted June 24, 2010 Posted June 24, 2010 thats the thing, its not lustre, its just the metal colourthoughts on this one?and here is a 1919 farthingThe Edw VII penny doesn't look streaked at all, just some dark staining which could be from anything. The 1919 penny looks in good enough condition for it to be "streaky lustre".I can't see them all that clearly, but the bun farthing is probably the result of a chemical or even something as mundane as some foodstuff being spilt on it. The 1919 farthing is very typical of it era and if I recall this feature continued until 1921. If brass cartridge cases were used and they contained simply copper and zinc, they could have been added to the furnace without any problems, but why this should make the metal streaky, I know not.Incidentally, this is a picture of the 1875 1d with streaky toning which I have suggested may be a result of mixing copper ores from two different sources.Interesting. Those dark patches probably look clearer "in hand"? I can't tell much from the picture.Question ~ this "streaking" on coins, as discussed and shown above. Is that the same thing as what they call "marbling" ?"Steaking" may or may not, be lustre. I would have said that "marbling" is the actual metal content, not lustre? IMO. Quote
Peckris Posted June 25, 2010 Posted June 25, 2010 (edited) interstingly it seems to pop in in 1953That halfpenny just looks stained scott, i.e. surface, not metal content. Dark patches on bronze are nearly always staining.And ... this is my 1000th post! Let's see if the label changes or not Oooh yes, I'm now a Forum God! And in less than a year too! Ok mortals, just build me a temple and offer up a different BU bun penny each week Edited June 25, 2010 by Peckris Quote
Red Riley Posted June 25, 2010 Posted June 25, 2010 And ... this is my 1000th post! Let's see if the label changes or not Something to do with fish? Oh sorry, I thought it said, 'Forum Cod'. Quote
Peckris Posted June 26, 2010 Posted June 26, 2010 And ... this is my 1000th post! Let's see if the label changes or not Something to do with fish? Oh sorry, I thought it said, 'Forum Cod'.><((((~º3 ººº Quote
1949threepence Posted June 27, 2010 Posted June 27, 2010 Question ~ this "streaking" on coins, as discussed and shown above. Is that the same thing as what they call "marbling" ?"Steaking" may or may not, be lustre. I would have said that "marbling" is the actual metal content, not lustre? IMO.OK, thanks Peck. I was a little unsure about whether or not there was a distinction. I always understood marbling to be the exactly parallel lines of slightly different colour, often running diagonally across the face of a coin. Oddly enough, by way of example, both my 1926 pennies have it. The EF OE, and the barely fine, ME. Not really the same as the 1953 coins, but similar to the 1919 penny & 1921 Italian coin, shown below. Maybe slightly more subtle.As you say, it is possibly the metal content Quote
scott Posted June 27, 2010 Posted June 27, 2010 i see the streaking on the cupro-nickel coins as well. Quote
Peckris Posted June 27, 2010 Posted June 27, 2010 i see the streaking on the cupro-nickel coins as well.You mean the reddish streaks commonly seen? That's just got to be a copper-mix fault hasn't it? Quite common on cupro-nickel 1947-1951, but I've seen it as late as mid-60s halfcrowns. Quote
Peckris Posted June 28, 2010 Posted June 28, 2010 yea and on 20p's lolI'm not surprised. Though you would think the Mint would have eradicated that by now! Quote
declan03 Posted June 7, 2018 Posted June 7, 2018 I,ve aquired this 1696 Bristol mint William III Sixpence with a small x in REX. Beautiful tone on one side but absolutely none on the reverse. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.